TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 828 of 1170
TM 9-2320-280-20-3 12-216 Change 2 12-140. REAR ANTENNA CABLES REPLACEMENT (Cont'd) 10. Remove five screws (7), clamps (3), and two antenna cables (1) from underbody (2). 11. Remove locknut (5), washer (4), capscrew (9), washer (4), and filler pipe clamp (8) from underbody (2) and filler pipe (6). Discard locknut (5). NOTE Perform steps 12 through 15 for M966, M966A1, M1025, M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044, M1044A1, M1045, M1045A1, M1045A2, M1046, and M1046A1 models only. 12. Remove two plain-assembled nuts (10), screws (12), clamps (11), and antenna cables (1) from wheelhouse (13). Discard plain-assembled nuts (10). 13. Remove two assembled locknuts (18), capscrews (15), two antenna cables (1), grommet (17), and retainer (16) from wheelhouse (13). Discard assembled locknuts (18). 14. Disconnect two antenna cables (1) from antenna base (14) and remove antenna cables (1). 15. Remove ten clamps (3) and two clamps (11) from antenna cables (1).