TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 814 of 1170
12-132.1. INSTALLATION OF NEW CONFIGURATION FRONT RADIO RACK BRACKET This task covers: a. Vehicle Preparation b. Installation a. Vehicle Preparation NOTE Refer to para. 10-66 for rivet removal. 1. Remove nine screws (7), plenum panel (11), and engine shroud mount (6) from “A” beam (1). 2. Remove four nuts (5), washers (4), screws (2), and two mounting brackets (3) from “A” beam (1). 3. Remove two rivets (10) and radio rack brace (8) from tunnel floor (9). INITIAL SETUP: Applicable Models All models except M996, M996A1, M997, M997A1, M997A2, M1037, M1042, M1097, M1097A1, M1097A2, M1123 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four locknuts (Appendix G, Item 71) Four locknuts (Appendix G, Item 128) Two blind rivets (Appendix G, Item 237) Sealant (Appendix C, Item 38) Manual References TM 9-2320-280-24P Equipment Condition • Front radio rack removed (para. 12-132). • Front floorboard removed (para. 11-154). • Front radio rack mounting bracket removed (para. 12-130). • Engine access cover removed (para. 10-15). TM 9-2320-280-20-3 12-204.2 Change 2