TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 802 of 1170
12-124. TROOP/CARGO WINTERIZATION FUEL CAN MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation Materials/Parts Four locknuts (Appendix G, Item 120) Manual References TM 9-2320-280-24P a. Removal b. Installation 1. Remove two locknuts (1), plate (2), and two capscrews (4) from fuel can mounting bracket (5) and left end closure (7). Discard locknuts (1). 2. Remove two locknuts (10), washers (9), capscrews (6), and fuel can mounting bracket (5) from left end closure (7). Discard locknuts (10). 3. Remove two spacers (8) from lower mounting holes (3) in left end closure (7). 1. Install two spacers (8) in lower mounting holes (3) in left end closure (7). 2. Install fuel can mounting bracket (5) on left end closure (7) with two capscrews (6), washers (9), and locknuts (10). 3. Secure fuel can mounting bracket (5) and plate (2) to left end closure (7) with two capscrews (4) and locknuts (1). 4. Tighten two locknuts (1) and locknuts (10) to 34 lb-ft (46 N•m). TM 9-2320-280-20-3 12-196 Change 2 INITIAL SETUP: Applicable Models M998, M998A1, M1038, M1038A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1)