TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 798 of 1170
b. Installation TM 9-2320-280-20-3 12-121. TROOP/CARGO WINTERIZATION TROOP SEAT ASSEMBLY AND BOW REPLACEMENT (Cont’d) 1. 2. 3. 4. 5. 6. 7. 8. Install block (6) on cargo bulkhead (4) with two screws (5), washers (7), and locknuts (8). NOTE Support assembly must be installed with narrow offset to outside of vehicle and rounded side up. Install support assembly (16) on “B” pillar (17) with three capscrews (15), washers (18), and locknuts (19). Install troop seat assembly (9), folded in stowed position, into support assembly (16) and on wheelhousing (14). Install front wheelhousing bracket (22) on wheelhousing (14) with two capscrews (21), washers (23), and locknuts (24). Tighten locknuts (24) to 49 lb-ft (66 NŽm). Install rear corner troop seat bracket (29) on wheelhousing (14) with three washers (27), capscrews (28), washers (26), and locknuts (25). Tighten locknuts (25) to 96 lb-in. (11 NŽm). Install troop seat assembly (9) on wheelhousing (14) with six washers (12), capscrews (13), washers (10), and locknuts (11). Tighten locknuts (11) to 96 lb-in. (11 NŽm). Install front bow (20), middle bow (2), and rear bow (3) on slots on outside of troop seat assembly (9). Install plate (1) on front bow (20). 12-192