TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 782 of 1170
12-118. TROOP/CARGO WINTERIZATION END CLOSURE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove seven screws (1) and clamping strip (9) from top cover assembly (5), channel (10), and right end closure (6). 2. Remove three screws (2) and clamping strip (3) from top cover assembly (5), outside corner plate (4), and right end closure (6). 3. Remove eight screws (8) and clamping strip (7) from top cover assembly (5), and right end closure (6). 4. Remove screw (14) from clamping strip (15), top cover assembly (5) and right end closure (6). 5. Remove eight nuts (11), capscrews (13), clamping strip (15), and top cover assembly (5) from right rear vehicle body (12). TM 9-2320-280-20-3 12-176 Change 2 Manual References TM 9-2320-280-24P Equipment Condition • Rear reflector removed (para. 12-126). • Rear composite light housing removed para. 12-127). • Handle assembly removed (right end closure only) (para. 12-123). • Antenna mounting bracket removed (right end closure only) (para. 12-125). • Fuel can mounting bracket removed (left end closure only) (para. 12-124). • Blackout/dome light wiring harness removed (para. 12-105). NOTE Replacement instructions for left and right end closures are basically the same. This procedure covers right end closure. INITIAL SETUP: Applicable Models M998, M998A1, M1038, M1038A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Twelve locknuts (Appendix G, Item 121) Personnel Required One mechanic One assistant