TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 78 of 1170
10-33. DRIVER'S SEAT AND SEAT BACK CUSHIONS REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove four lock pins (2) from seat holddown pins (5). Discard lock pins (2). 2. Remove four seat back cushion flaps (4) from holddown pins (5) and remove seat back cushion (3) from seat frame (7). 3. Remove two seat cushion straps (6) from holddown pins (5). 4. Remove front retainer strip (8) from seat frame (7) and remove seat cushion (1). b. Installation 1. Install seat cushion (1) on seat frame (7) and install retainer strip (8) on seat frame (7). 2. Install two seat cushion straps (6) on holddown pins (5). 3. Install seat back cushion (3) on seat frame (7) and four flaps (4) on holddown pins (5). 4. Install four lock pins (2) on holddown pins (5). INITIAL SETUP: Applicable Models M966, M996, M997, M998, M1025, M1026, M1035, M1036, M1037, M1038, M1042, M1043, M1044, M1045, M1046, M1097 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four lock pins (Appendix G, Item 132) Manual References TM 9-2320-280-24P TM 9-2320-280-20-3 10-60 Change 2 7 8 2 3 1 4 2 6 5