TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 74 of 1170
1. Remove four screws (2), lockwashers (3), washers (1), and cargo floor access cover (4) from cargo floor (5). Discard lockwashers (3). 2. Remove adhesive sealant from cargo floor access cover (4) and cargo floor (5). Inspect for missing or damaged insert nuts (6). Replace missing or damaged insert nuts (6) (para. 10-66). 1. Apply adhesive sealant to cargo floor (5) and cargo floor access cover (4). 2. Install cargo floor access cover (4) on cargo floor (5) with four washers (1), lockwashers (3), and screws (2). c. Installation b. Inspection a. Removal INITIAL SETUP: TM 9-2320-280-20-3 10-56.2 Change 2 10-31.1. CARGO FLOOR ACCESS COVER MAINTENANCE (M1123) This task covers: a. Removal c. Installation b. Inspection Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four lockwashers (Appendix G, Item 139) Adhesive sealant (Appendix C, Item 9.1) Manual References TM 9-2320-280-24P Equipment Condition • Mortar ammo container removed, if equipped (para. 12-149). • Rear radio rack removed, if equipped (para. 12-144). • Troop/cargo winterization heater assembly removed, if equipped (para. 12-95). • Troop/cargo winterization front cargo floor cover removed, if equipped (para. 12-110). • S250 shelter removed, if equipped (para. 11-120). • Ammo box tray (40 mm and 50 cal.) removed, if equipped (para. 11-105). • Soft top ambulance litter assembly removed, if equipped (para. 11-124).