TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 715 of 1170
12-76. ARCTIC CURTAIN CHANNEL ASSEMBLY REPLACEMENT (2-MAN CREW) This task covers: a. Removal b. Installation a. Removal 1. Peel curtain (13) back from fastener tape (7) on channel assembly (8). 2. Open two straps (1) from curtain (13) and channel assembly (8). 3. Remove four capscrews (4), washers (5), and channel assembly (8) from cargo floor (12). 4. Peel and remove fastener tape (7) from channel assembly (8). 5. Remove seal (9) from channel assembly (8). 6. Remove four nuts (11), washers (10), screws (3), and two footman loops (2) from channel assembly (8). INITIAL SETUP: Applicable Models M998, M998A1, M1037, M1038, M1038A1, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-280-24P b. Installation TM 9-2320-280-20-3 Change 2 12-109 NOTE Ensure surface is free of dirt and oil before applying adhesive backing. 1. Install two footman loops (2) on channel assembly (8) with four screws (3), washers (10), and nuts (11). 2. Install seal (9) into channel assembly (8). 3. Peel paper backing (6) from fastener tape (7) and install fastener tape (7) on channel assembly (8). 4. Install channel assembly (8) on cargo floor (12) with four washers (5) and capscrews (4). 5. Install curtain (13) on channel assembly (8) with two straps (1). 6. Secure curtain (13) to channel assembly (8) with fastener tape (7).