TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 713 of 1170
12-74. ARCTIC CURTAIN ANGLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Peel curtain (2) back from fastener tape (1) on angle assembly (4). 2. Remove three locknuts (8), washers (9), capscrews (5), washers (6), and angle assembly (4) from cargo floor (7). Discard locknuts (8). 3. Peel fastener tape (1) from angle assembly (4). 4. Clean remaining adhesive from angle assembly (4) surface. INITIAL SETUP: Applicable Models M998, M998A1, M1037, M1038, M1038A1, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Adhesive-sealant (Appendix C, Item 10) Three locknuts (Appendix G, Item 94) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-24P b. Installation TM 9-2320-280-20-3 Change 2 12-107 NOTE Ensure surface is free of dirt and oil before applying adhesive backing. 1. Peel paper backing (3) from fastener tape (1) and install fastener tape (1) to angle assembly (4). 2. Install angle assembly (4) on cargo floor (7) with three washers (6), capscrews (5), washers (9), and locknuts (8). Tighten locknuts (8) to 17 lb-ft (23 N•m). 3. Attach curtain (2) to fastener tape (1) on angle assembly (4).