TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 70 of 1170
7. Remove four screws (8) from instrument cluster (3) and dash panel (7) and pull instrument cluster (3) away for access to speedometer cable (2). 8. Remove speedometer cable (2) and O-ring (4) from speedometer (1). Discard O-ring (4). 9. Remove grommet (6) from cowl (5) and route speedometer cable (2) through cowl (5). 10. Remove cotter pin (14), washer (13), and accelerator cable (15) from linkage (12). Discard cotter pin (14). 11. Pull retainer (9) clear of linkage (12) and remove retainer (9) from between splash shield (10) and frame rail (11) by pulling forward and then down. b. Installation 1. Install retainer (9) by sliding up between splash shield (10) and frame rail (11) forward of cowl (5), and then sliding back to mounting position on cowl (5). 2. Connect accelerator cable (15) to linkage (12) with washer (13) and cotter pin (14). 3. Route speedometer cable (2) through cowl (5). Install O-ring (4) into end of speedometer cable (2) and connect speedometer cable (2) to speedometer (1). 4. Install instrument cluster (3) on dash panel (7) with four screws (8). 5. Install grommet (6) on speedometer cable (2) in cowl (5). 10-31. LEFT INNER COWL INSULATION PANEL REPLACEMENT (Cont'd) TM 9-2320-280-20-3 10-54 Change 2