Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download

Page 634 of 1170

TM 9-2320-280-20-3 Change 1 12-35 18. Remove nut (15) from IGN terminal (14) on regulator (13). 19. Install boot (17) on lead 5A (16). 20. Install lead 5A (16) to IGN terminal (14) on regulator (13) with nut (15). Tighten nut (15) to 23-27 lb-in. (2-3 N•m). 21. Apply grease to IGN terminal (14), lead 5A (16), and inside of boot (17), and slide boot (17) over IGN terminal (2). 22. Remove nut (18) from AC terminal (21) on regulator (13). 23. Install boot (20) on lead 2A (19). 24. Install lead 2A (19) to AC terminal (21) on regulator (13) with nut (18). Tighten nut (18) to 18-22 lb-in. (2-3 N•m). 25. Apply grease to AC terminal (21), lead 2A (19), and inside of boot (20), and slide boot (20) over AC terminal (21). 12-24.1. 100/200 AMPERE DUAL VOLTAGE ALTERNATOR AND REGULATOR CONVERSION (Cont’d) FOLLOW-ON TASKS: • Connect battery ground cable (para. 4-73). • Lower and secure hood (TM 9-2320-280-10).