TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 631 of 1170
TM 9-2320-280-20-3 12-34.6 Change 1 1. Remove nut (1) and washer (2) from shaft (6) of alternator assembly (5). 2. Install previously removed pulley (3) on woodruff key (4) and shaft (6) with washer (2) and nut (1). 3. Place alternator assembly (5) in a soft-jawed vise, and tighten nut (1) to 115-125 lb-ft (156-170 N•m). c. 200 Ampere Dual Voltage Alternator and Regulator Installation 12-24.1. 100/200 AMPERE DUAL VOLTAGE ALTERNATOR AND REGULATOR CONVERSION (Cont’d)