TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 607 of 1170
12-15. EXHAUST REINFORCEMENT BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two isolators (4) from wheelhouse (3) and reinforcement bracket (5). 2. Remove eight locknuts (6), washers (1), capscrews (2), washers (1), and reinforcement bracket (5) from wheelhouse (3). Discard locknuts (6). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Eight locknuts (Appendix G, Item 70) Manual References TM 9-2320-280-24P Equipment Condition Deep water fording kit exhaust assembly removed (para. 12-2). b. Installation 1. Install reinforcement bracket (5) on wheelhouse (3) with eight washers (1), capscrews (2), washers (1), and locknuts (6). Tighten capscrews (2) to 6 lb-ft (8 N • m). 2. Install two isolators (4) on wheelhouse (3) and reinforcement bracket (5). FOLLOW-ON TASK: Install deep water fording kit exhaust assembly (para. 12-2). TM 9-2320-280-20-3 12-18 Change 2 1 2 3 5 1 6 4 ~