Sign up to sell your inventory with NSN Lookup

TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download

Page 605 of 1170

TM 9-2320-280-20-3 12-13. SENSOR CUP VENT LINE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic’s tol kit: ● Hood raised and secured (TM 9-2320-280-10). automotive (Appendix B, Item 1) ● Egine access cover removed (paa. 10-15). Manual References TM 9-2320-280-10 TM 9-2320-20-24P 1. Loosen clamp (3) and disconnect sensor cup vent line (1) from CDR valve (2). 2. Loosen clamp (6) and remove vent line (1) from sensor cup (5). 3. Remove two clamps (3) and (6) from vent line (1). 1. Install two clamps (3) and (6) on vent line (1). 2. Route vent line (1) through “A” beam (4). 3. Connect vent line (1) to sensor cup (5) with clamp (6). 4. Connect vent line (1) to CDR valve (2) with clamp (3). FOLLOW-ON TASKS: . Install engine access cover (para. 10-15). . Lower and secure hood (TM 9-2320-280-10). 12-16