TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 602 of 1170
12-10. CDR VALVE VENT LINE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Loosen clamp (2) and disconnect CDR valve vent line (3) from CDR valve (1). 2. Remove two tiedown straps (5) from vent line (3) and existing hoses (6) on “A” beam (4). Discard tiedown straps (5). 3. Loosen clamp (2) and remove vent line (3) from elbow (8) on selector valve (7). 4. Remove clamps (2) from vent line (3). INITIAL SETUP: Applicable Models All models except M966, M966A1, M1025, M1025A1, M1025A2, M1026, M1026A1, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two tiedown straps (Appendix G, Item 314) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Hood raised and secured (TM 9-2320-280-10). b. Installation 1. Install clamps (2) on vent line (3). 2. Connect vent line (3) to elbow (8) on selector valve (7) with clamp (2). 3. Install vent line (3) along “A” beam (4) on existing hoses (6) with two tiedown straps (5). 4. Connect vent line (3) to CDR valve (1) with clamp (2). TM 9-2320-280-20-3 Change 2 12-13 FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10). 1 2 3 4 5 6 7 3 2 8 ~