TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 599 of 1170
12-8. FUEL TANK VENT STACK TUBE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Disconnect fuel tank vent line (8) from fuel tank vent stack tube (2). 2. Remove nut (10), lockwasher (9), screw (7), and clamp (6) from fuel tank vent stack tube (2) and air intake assembly (1). Discard lockwasher (9). 3. Remove screw (5), lockwasher (4), fuel tank vent stack tube (2), and clamp (3) from air intake assembly (1). Discard lockwasher (4). INITIAL SETUP: Applicable Models All models except M966, M966A1, M1025, M1025A1, M1025A2, M1026, M1026A1, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two lockwashers (Appendix G, Item 183) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Hood raised and secured (TM 9-2320-280-10). b. Installation 1. Install fuel tank vent stack tube (2) and clamp (3) on air intake assembly (1) with lockwasher (4) and screw (5). 2. Install fuel tank vent stack tube (2) and clamp (6) on air intake assembly (1) with lockwasher (9), screw (7), and nut (10). 3. Connect vent line (8) to vent stack tube (2). TM 9-2320-280-20-3 12-10 Change 2 FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10). 1 2 3 4 5 6 9 7 8 10