TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 598 of 1170
12-7. AIR CLEANER TO SELECTOR VALVE VENT LINE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Disconnect air cleaner-to-selector valve vent line (2) from air cleaner assembly fitting (1). 2. Remove three tiedown straps (3) and vent line (2) from existing hoses (4) on “A” beam (5). Discard tiedown straps (3). 3. Remove air cleaner-to-selector valve vent line (2) from selector valve (6). INITIAL SETUP: Applicable Models All models except M966, M966A1, M1025, M1025A1, M1025A2, M1026, M1026A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Three tiedown straps (Appendix G, Item 314) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Hood raised and secured (TM 9-2320-280-10). b. Installation 1. Connect air cleaner-to-selector valve vent line (2) to selector valve (6). 2. Route vent line (2) along “A” beam (5) and secure to existing hoses (4) with three tiedown straps (3). 3. Connect air cleaner-to-selector vent line (2) to air cleaner assembly fitting (1). TM 9-2320-280-20-3 Change 2 12-9 FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).