TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 597 of 1170
12-6. AIR CLEANER DUST CAP MAINTENANCE This task covers: a. Removal c. Installation b. Inspection a. Removal 1. Remove four screws (5) and dust unloader cover plate (4) from air cleaner bracket (6). 2. Remove clamp (2) and air cleaner dust cap (3) from air cleaner assembly (1). INITIAL SETUP: Applicable Models All models except M966, M966A1, M1025, M1025A1, M1025A2, M1026, M1026A1, M1121 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Hood raised and secured (TM 9-2320-280-10). b. Inspection 1. Install dust cap (3) on air cleaner assembly (1) with clamp (2). Tighten clamp (2) to 45-50 lb-in. (5-6 N•m). 2. Install dust unloader cover plate (4) on air cleaner bracket (6) with four screws (5). FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10). TM 9-2320-280-20-3 12-8 Change 1 c. Installation Inspect air cleaner dust cap (3) for cuts, tears, obstructions, or enlarged gap. Replace if cut, torn, worn, missing, or if center opening exceeds 0.125 in. (3.18 mm).