TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 593 of 1170
12-3. DEEP WATER FORDING KIT AIR INTAKE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove locknut (5), washer (3), capscrew (2), and washer (3) from air intake assembly (1) and windshield mounting bracket (4). Discard locknut (5). 2. Loosen clamp (6) and remove air intake assembly (1) from air cleaner extension elbow (7). INITIAL SETUP: Applicable Models All models except M966, M966A1, M1025, M1025A1, M1025A2, M1026, M1026A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Locknut (Appendix G, Item 105) Manual References TM 9-2320-280-24P Equipment Condition • Weathercap removed (para. 3-18). • Fuel tank vent stack tube removed (para. 12-8). b. Installation 1. Install air intake assembly (1) into air cleaner extension elbow (7) with clamp (6). Tighten clamp (6) to 45-50 lb-in. (5-6 N•m). 2. Install air intake assembly (1) on windshield mounting bracket (4) with washer (3), capscrew (2), washer (3), and locknut (5). Tighten capscrew (2) to 43 lb-ft (58 N•m). TM 9-2320-280-20-3 12-4 Change 2 FOLLOW-ON-TASKS: • Install weather cap (para. 3-18). • Install fuel tank vent stack tube (para. 12-8). 1 2 3 4 3 5 6 7