TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 578 of 1170
11-208. HEATER MOUNTING BRACKET ASSEMBLY REPLACEMENT (M996, M996A1) This task covers: a. Removal b. Installation a. Removal 1. Remove two screws (1), clamps (2), and fuel line (3) from bracket (4). 2. Remove six screws (8) from NBC control box (9) and body (7), and pull control box (9) away for access. 3. Remove eight rivets (6) and bracket (4) from body (5). NOTE For instructions on replacement of rivets, refer to para. 10-66. INITIAL SETUP: Applicable Models M996, M996A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Eight blind rivets (Appendix G, Item 241) Manual References TM 9-2320-280-24P Equipment Condition Heater removed (para. 11-209). b. Installation 1. Install bracket (4) on body (5) with eight rivets (6). 2. Install fuel line (3) and two clamps (2) on bracket (4) with two screws (1). 3. Install NBC control box (9) on body (7) with six screws (8). TM 9-2320-280-20-3 11-314 Change 2