TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 56 of 1170
TM 9-2320-280-20-3 10-22. WINDSHIELD BALLISTIC GLASS REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models All except M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Sealing compound (Appendix C, Item 47) Manual References TM 9-2320-280-24P Personnel Required One mechanic One assistant Equipment Condition Windshield wiper blade and arm removed (para. 10-70). General Safety Instructions Eyeshields and gloves are required when installing and removing windshield glass. Use eyeshields and gloves when removing and installing windshield glass. Glass could shatter causing injury. 1. Remove six screws (6) and upper retainer (5) from windshield frame (4). 2. Remove four screws (1) and center retainer (2) from windshield frame (4). 3. Remove ballistic glass (3) from windshield frame (4). 4. Clean sealing compound from windshield frame (4). 1. Apply a 1/8 in. (3 mm) bead of sealing compound around windshield frame (4). 2. Position ballistic glass (3) to windshield frame (4) with marking on weatherstrip facing inward. 3. Install center retainer (2) on windshield frame (4) with four screws (1). 4. Install upper retainer (5) on windshield frame (4) with six screws (6). 10-40