TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 54 of 1170
10-21. WINDSHIELD GLASS AND WEATHERSTRIP REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove six capscrews (7) and upper retainer (3) from windshield frame (5). 2. Remove four capscrews (1) and center retainer (2) from windshield frame (5). 3. Remove weatherstrip (4) and glass (6) from windshield frame (5). 4. Clean sealant from windshield frame (5). WARNING Use eyeshields and gloves when removing and installing windshield. Glass could shatter causing injury. INITIAL SETUP: Applicable Models M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Sealant (Appendix C, Item 38) Manual References TM 9-2320-280-24P Equipment Condition Windshield wiper blade and arm removed (para. 10-70). General Safety Instructions Eyeshields and gloves are required when installing and removing windshield glass. b. Installation 1. Apply a 1/8 inch (3 mm) bead of sealing compound to edge of glass (6) and to windshield frame (5). 2. Install weatherstrip (4) on glass (6). 3. Install glass (6) and weatherstrip (4) on windshield frame (5) with center retainer (2) and four capscrews (1). 4. Apply a thin bead of sealant to top edge of outside weatherstrip (4). 5. Install upper retainer (3) on windshield frame (5) with six capscrews (7). TM 9-2320-280-20-3 10-38 Change 1