TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 532 of 1170
11-184. AIR INTAKE COMPARTMENT PANELS REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M997, M997A1, M997A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two lockwashers (Appendix G, Item 182) Two tapping screws (Appendix G, Item 283) Manual References TM 9-2320-280-24P Equipment Condition • Blower housing opened (para. 11-198). • Front cover panel removed (para. 11-187). 1. Remove six screws (2) from panel (3) and condenser fan housing (4). 2. Remove three screws (5) and panel (3) from panel (7). 3. Remove two tapping screws (1) from panel (7) and air intake assembly (14). Discard tapping screws (1). 4. Remove two nuts (13), washers (12), screws (8), washers (10), lockwashers (9), and panel (7) from body (11). Discard lockwashers (9). 1. Install panel (7) on body (11) and air intake assembly (14) with two washers (10), lockwashers (9), screws (8), washers (12), and nuts (13). 2. Install panel (7) on air intake assembly (14) with two tapping screws (1). 3. Install panel (3) on panel (7) and fan housing (4) with three screws (5). 4. Secure panel (3) to fan housing (4) with six screws (2). b. Installation a. Removal TM 9-2320-280-20-3 11-268 Change 2 FOLLOW-ON TASKS: • Close blower housing (para. 11-198). • Install front cover panel (para. 11-187). 1 2 3 4 5 7 8 9 10 11 12 13 14 ~