TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 522 of 1170
11-177. ATTENDANT SEAT STOWAGE BRACKETS REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove four screws (3) and two footman loops (5) from body (1), and remove strap assembly (2) from footman loops (5). 2. Remove eight rivets (6) and two brackets (7) from body (1). 3. Inspect blind rivet (4) for damage. Replace if damaged. NOTE • For instructions on replacement of rivets, refer to para. 10-66. • Replacement procedures for attendant seat stowage brackets are basically the same for M996, M996A1, M997, M997A1, and M997A2 ambulances, with the exception of the strap assembly. The strap assembly is mounted in a vertical position on the body of the M996 and M996A1 ambulance. This procedure covers the atten- dant seat stowage brackets in the M997, M997A1, and M997A2 ambulances. INITIAL SETUP: Applicable Models M996, M996A1, M997, M997A1, M997A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Eight blind rivets (Appendix G, Item 251) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Attendant seat removed from stowed position (TM 9-2320-280-10). b. Installation 1. Install two brackets (7) on body (1) with eight rivets (6). 2. Install strap assembly (2) on two footman loops (5) and install footman loops (5) on body (1) with four screws (3). FOLLOW-ON TASK: Stow attendant seat (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 11-259