TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 513 of 1170
TM 9-2320-280-20-3 I 11-169. INTERCOM AND BRACKETS REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Manual References M996, M996A1, M997, M997A1, M997A2 TM 9-2320-280-24P Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) a. Removal 1. 2. 3. 4. 5. 6. 7. 8. Disconnect intercom cable (11) from intercom control (10). Remove two nuts (17), washers (16), capscrews (12), washers (13), and intercom control (10) from intercom mounting bracket (6). Disconnect cable (7) from audio amplifier (8). Remove four nuts (3), washers (4), capscrews (9), washers (4), and audio amplifier (8) from intercom mounting bracket (6). Remove two nuts (14), washers (15), capscrews (20), and washers (21) from intercom mounting bracket (6) and radio rack support (5). Remove two nuts (18), washers (19), screws (2), and intercom mounting bracket (6) from radio rack (1). NOTE Perform step 7 for M996 and M996A1 vehicles only. Disconnect intercom cable (11) from intercom control (22). Remove two capscrews (24), washers (25), and intercom control (22) from wall (23). NOTE Perform step 8 for M997, M997A1, and M997A2 vehicles only. Disconnect intercom cable (11) from intercom control (26). Remove two nuts (29), washers (28), reinforcement bracket (27), two capscrews (32), washers (31), and intercom control (26) from body (30). 11-250