TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 493 of 1170
TM 9-2320-280-20-3 I 11-156. BULKHEAD DOOR LATCH REPLACEMENT (Cont’d) I b. Installation 1. 2. 3. 4. 5. 6. NOTE Perform step 1 for M996 and M996A1 vehicles. Perform step 2 for M997, M997A1, and M997A2 vehicles. Install upper rod (5) through rod opening (2) at top of bulkhead door (1), and lower rod (8) through rod opening (10) at bottom of door (1). Install upper rod (5) and lower rod (8) through latch opening (9) in door (1). Install latch assembly (6) through latch opening in door (1), rotate latch assembly (6) to a horizontal position, and connect rods (5) and (8) to latch assembly (6). Rotate latch assembly (6) to a vertical position and install two washers (4), screws (3), washers (4), and nuts (7). Install cover plate (14) and handle (17) on door (1) with four washers (15) and screws (16). Install washer (13) and handle (12), on handle (17) with setscrew (11). 11-230