TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 492 of 1170
TM 9-2320-280-20-3 11-156. BULKHEAD DOOR LATCH REPLACEMENT (Cont’d) I 4. Remove setscrew (11), handle (12), and washer (13) from door (1). 5. Remove four screws (16), washers (15), cover plate (14), and handle (17) from door (1). 6. Remove four nuts (23), washers (20), screws (19), and washers (20) from latch assembly (22) and door (1). 7. Rotate latch assembly (22) to horizontal position and disconnect rods (21) and (24), then remove latch assembly (22). NOTE Perform step 8 for M996 and M996A1 vehicles. Perform step 9 for M997, M997A1, and M997A2 vehicles. 8. Remove upper rod (21) through rod opening (18) at top of door (1), and lower rod (24) through rod opening (26) at bottom of door (1). 9. Remove upper rod (21) and lower rod (24) through latch opening (25) in door (1), 11-229