TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 49 of 1170
10-19. 3.5-TON JACK STOWAGE BRACKET AND COVER REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Lift two latches (9) on cover (10) and remove cover (10) from bracket (5). 2. Remove two wing nuts (14), spacers (13), washers (12), and jack (11) from bracket (5). 3. Remove nut (6), washer (7), capscrew (8), and washer (7) from bracket (5). 4. Remove two capscrews (4), lockwashers (3), washers (2), and bracket (5) from splash shield (1). Discard lockwashers (3). INITIAL SETUP: Applicable Models M997A2, M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, M1123 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Material/Parts Two lockwashers (Appendix G, Item 135) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Hood raised and secured (TM 9-2320-280-10). b. Installation 1. Install bracket (5) on splash shield (1) with two washers (2), lockwashers (3), and capscrews (4). 2. Install washer (7), capscrew (8), washer (7), and nut (6) on bracket (5). 3. Install jack (11) on bracket (5) with two washers (12), spacers (13), and wing nuts (14). 4. Install cover (10) on bracket (5). 5. Secure cover (10) on bracket (5) with two latches (9). TM-9-2320-280-20-3 Change 2 10-33 FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10). NOTE The tools for the jack are stored behind the driver’s seat.