TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 484 of 1170
11-152. STOWAGE DOOR REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove seal (4), if damaged, from door (8). 2. Remove three rivets (3) and door (8) from hinge (2). 3. Remove three rivets (1) and hinge (2) from bulkhead (6). 4. Remove two rivets (5) and hasp (7) from bulkhead (6). 5. Remove four rivets (10) and staple (9) from door (8). NOTE • Upper and lower stowage doors are removed and installed basically the same. This procedure covers the lower stowage door. • For instructions on replacement of rivets, refer to para. 10-66. INITIAL SETUP: Applicable Models M997, M997A1, M997A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Five solid rivets (Appendix G, Item 271) Three blind rivets (Appendix G, Item 260) Four solid rivets (Appendix G, Item 272) Manual References TM 9-2320-280-24P b. Installation 1. Install hasp (7) on bulkhead (6) with two rivets (5). 2. Install staple (9) on door (8) with four rivets (10). 3. Install hinge (2) on bulkhead (6) with three rivets (1). 4. Install door (8) on hinge (2) with three rivets (3). 5. Install seal (4) on door (8), if removed. TM 9-2320-280-20-3 Change 2 11-221