TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 451 of 1170
11-132. REAR DOOR HOLDER ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two rivets (1) and guide (2) from door (3). 2. Remove screw (5) and holder (4) from body (6). NOTE • For instructions on replacement of rivets, refer to para. 10-66. • Holder and guide must be replaced together; both parts are considered to be one assembly. INITIAL SETUP: Applicable Models M996, M996A1, M997, M997A1, M997A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two solid rivets (Appendix G, Item 269) (M996 series) Two blind rivets (Appendix G, Item 260) (M997 series) Manual References TM 9-2320-280-24P b. Installation 1. Install holder (4) on body (6) with screw (5). 2. Install guide (2) on door (3) with two rivets (1). TM 9-2320-280-20-3 11-192 Change 2