TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 448 of 1170
11-130. REAR DOOR SEALS REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Pry seal (1) from body channel (2) and remove seal (1). 2. Remove two rivets (5), step seal (3), and retainer (4) from body (6). 3. Pry seal (8) from door (7) and remove plug (9) from seal (8). NOTE For instructions on replacement of rivets, refer to para. 10-66. INITIAL SETUP: Applicable Models M996, M996A1, M997, M997A1, M997A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two blind rivets (Appendix G, Item 257) Manual Refer ences TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Rear steps lowered (TM 9-2320-280-10). • Rear door seal protector removed (para. 11-129). b. Installation 1. Install plug (9) into seal (8) and install seal (8) on door (7). 2. Install step seal (3) and retainer (4) on body (6) with two rivets (5). 3. Install seal (1) by seating seal (1) into body channel (2). FOLLOW-ON TASKS: • Raise rear steps (TM 9-2320-280-10). • Install rear door seal protector (para. 11-129). • Adjust rear door (para. 11-125). TM 9-2320-280-20-3 Change 2 11-189