TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download

Page 446 of 1170

11-128. REAR DOOR LATCH ASSEMBLY AND GUIDE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Slide latch assembly (7) down until upper latch rod (8) is out of upper guide (2). Slide latch assembly (7) up until lower latch rod (6) is out of lower guide (5). 2. Remove four rivets (1), latch guide (2), and shims (3), if present, from door (4). NOTE For instructions in replacement of rivets, refer to para. 10-66. INITIAL SETUP: Applicable Models M996, M996A1, M997, M997A1, M997A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four solid rivets (Appendix G, Item 269) Manual References TM 9-2320-280-24P Equipment Condition Rear door handles removed (para. 11-127). b. Installation 1. Install latch guide (2) and shims (3), if removed, on door (4) with four rivets (1). 2. Slide lower latch rod (6) into lower guide (5). 3. Insert upper latch rod (8) into upper guide (2) and slide latch assembly (7) up to mounting position. FOLLOW-ON TASKS: • Install rear door handles (para. 11-127). • Adjust latch rod brackets (para. 11-131). TM 9-2320-280-20-3 Change 2 11-187