TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 435 of 1170
11-124. SOFT TOP AMBULANCE LITTER ASSEMBLY MAINTENANCE This task covers: a. Removal d. Assembly b. Disassembly e. Installation c. Inspection NOTE For instructions on replacement of rivets, refer to para. 10-66. 1. Remove two capscrews (22) and washers (21) from litter assembly (1), spacers (20), and cargo floor (26). 2. Remove two locknuts (11), washers (12), capscrews (24), and washers (12) from litter assembly (1), spacers (25), and cargo floor (26). Discard locknuts (11). 3. Remove four locknuts (13), washers (14), capscrews (19), washers (14), and shims (17) from litter assembly (1) and wheelhouses (10). Discard locknuts (13). 4. Remove four locknuts (15), washers (16), capscrews (23), washers (16), and shims (18) from litter assembly (1) and wheelhouses (10). Discard locknuts (15). 5. Remove two nuts (9), washers (5), capscrews (4), and washers (5) from spacers (6), litter assembly (1), and cargo floor (26). 6. Remove two locknuts (8), washers (3), capscrews (2), and washers (3) from spacers (7), litter assembly (1), and cargo floor (26). Discard locknuts (8). 7. Remove litter assembly (1) from vehicle. NOTE Note position of spacers for installation. 8. Remove spacers (6), (7), (20), and (25) from cargo floor (26). a. Removal INITIAL SETUP: Applicable Models M1035, M1035A1, M1035A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Special Tools Torque adapter (Appendix B, Item 145) Materials/Parts Eleven locknuts (Appendix G, Item 70) Twenty-two locknuts (Appendix G, Item 128) Six lockwashers (Appendix G, Item 133) Eight locknuts (Appendix G, Item 112) Eight blind rivets (Appendix G, Item 245) Two lockwashers (Appendix G, Item 135) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Tailgate lowered (TM 9-2320-280-10). TM 9-2320-280-20-3 11-176 Change 2