TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 424 of 1170
11-118. SHELTER CARRIER TAILGATE BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M1037, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Three locknuts (Appendix G, Item 128) Manual References TM 9-2320-280-24P Equipment Condition Shelter carrier tailgate removed (para. 11-117). NOTE The procedure for replacement of right and left tailgate brackets is basically the same. This procedure covers the right bracket. 1. Remove nut (7), washer (6), capscrew (5), and washer (6) from tailgate bracket (8) and shelter support assembly (3). 2. Remove three locknuts (4), washers (2), capscrews (1), washers (2), and tailgate bracket (8) from shelter support assembly (3). Discard locknuts (4). 1. Install tailgate bracket (8) on shelter support assembly (3) with three washers (2), capscrews (1), washers (2), and locknuts (4). 2. Secure tailgate bracket (8) to shelter support assembly (3) with washer (6), capscrew (5), washer (6), and nut (7). Tighten nut (7) to 65 lb-ft (88 N•m). Tighten capscrews (1) to 26 lb-ft (35 N•m). b. Installation a. Removal TM 9-2320-280-20-3 Change 2 11-165 FOLLOW-ON TASK: Install shelter carrier tailgate (para. 11-117).