TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 421 of 1170
11-115. SHELTER SUPPORT REINFORCEMENT REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove two lockbolts (7), lockwashers (6), washers (5), reinforcement (4), and shims (3) (if installed) from mounting bracket (2). Discard lockbolts (7) and lockwashers (6). NOTE It may be necessary to detach cab rear panel straps and turnbuttons and roll cab rear panel upward to gain access to front support reinforcements. INITIAL SETUP: Applicable Models M1037, M1042, M1097, M1097A1, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two lockbolts (Appendix G, Item 69) Two lockwashers (Appendix G, Item 179) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Tailgate lowered (TM 9-2320-280-10). b. Installation Install shims (3) (if installed) and reinforcement (4) on support assembly (1) and mounting bracket (2) with two lockbolts (7), lockwashers (6), and washers (5). Tighten lockbolts (7) to 90 lb-ft (122 N•m). FOLLOW-ON TASK: Raise and secure tailgate (TM 9-2320-280-10). NOTE Ensure correct positioning of shims, if installed, upon installation of lockbolts. TM 9-2320-280-20-3 11-162 Change 2