TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 413 of 1170
11-156.6 Change 1 1. Install hose (4) in hole (2) on inner bearing (1). 2. Connect low-pressure water hose (5) to hose (4). 3. Turn water on and rotate weapon station tray (3) several full rotations. NOTE Allow water to force out any dirt or grit within turret bearing. 4. Turn water off when cleaning is completed. 5. Disconnect low-pressure water hose (5) from hose (4). NOTE Hose assembly may either be stowed in place on weapon station tray or removed. 6. Remove hose (4) from hole (2) on inner bearing (1). b. Cleaning TM 9-2320-280-20-3 11-112.1. TURRET CLEANING (Cont'd)