TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 402 of 1170
11-109. WATER CAN/M13 DECON CAN BUMPER REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove two plain-assembled nuts (4), screws (3), and water can bumper (2) from wheelhouse (1). Discard plain-assembled nuts (4). INITIAL SETUP: Applicable Models M1025, M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044, M1044A1 Tools General mechanic’s tool kit: automotive (appendix B, Item 1) Materials/Parts Two plain-assembled nuts (Appendix G, Item 201) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-24P TM 9-2320-280-10 Equipment Condition Rear of cargo shell door raised (TM 9-2320-280-10). b. Installation Install water can bumper (2) on wheelhouse (1) with two screws (3) and plain-assembled nuts (4). NOTE • M1025, M1025A1, M1025A2, M1026, and M1026A1 vehicles have both a water can and M13 decon can bumpers. • M1043, M1043A1, M1043A2, M1044, and M1044A1 vehicles have only a water can bumper. TM 9-2320-280-20-3 Change 2 11-151 FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).