TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 401 of 1170
TM 9-2320-280-20-3 11-108. WATER CAN TRAY REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Manual References M1025, M1025A1, M1025A2, M1026, TM 9-2320-280-10 M1026A1, M1043, M1043A1, M1043A2, TM 9-2320-280-24P M1044, M1044A1 Equipment Condition Tools Rear of cargo shell door raised General mechanic’s tool kit: (TM 9-2320-280-10). automotive (Appendix B, Item 1) Personnel Required One mechanic One assistant NOTE For M1025; M1025A1, M1025A2, M1026, and M1026A1 vehicles, go to step 2. 1. Remove four screws (2), washers (3), and water can tray (1) from cargo floor (5). 2. Remove three screws (2), washers (3), and water can tray (1) from cargo floor (5). 3. Inspect rivnuts (4) for damage. Replace if damaged. b. Installation NOTE For M1025, M1025A1, M1025A2, M1026, and M1026A1 vehicles, go to step 2. 1. Install water can tray (1) on cargo floor (5) with four washers (3) and screws (2). Tighten screws (2) to 6 lb-ft (8 N.m). 2. Install water can tray (1) on cargo floor (5) with three washers (3) and screws (2). Tighten screws (2) to 6 lb-ft (8 N=m). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). 11-150