TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 400 of 1170
11-107. TRIPLE AMMO BOX TRAY (40 MM) REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove three locknuts (8), washers (2), capscrews (3), and washers (2) from ammo box tray (1) and cargo floor (9). Discard locknuts (8). 2. Remove three locknuts (7), washers (4), reinforcement brackets (6), capscrews (5), washers (4), and ammo box tray (1) from cargo floor (9). Discard locknuts (7). INITIAL SETUP: Applicable Models M1025, M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044, M1044A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Six locknuts (Appendix G, Item 70) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation 1. Install ammo box tray (1) on cargo floor (9) with three washers (4), capscrews (5), reinforcement brackets (6), washers (4), and locknuts (7). 2. Secure ammo box tray (1) to cargo floor (9) with three washers (2), capscrews (3), washers (2), and locknuts (8). Tighten capscrews (3) and (5) to 6 lb-ft (8 N•m). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 11-149