TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 395 of 1170
11-102. TRIPOD BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove locknut (8), washer (4), large washer (7), capscrew (3), and washer (4) from tripod bracket (5) and cargo floor (6). Discard locknut (8). 2. Remove locknut (9), washer (1), capscrew (2), washer (1), and tripod bracket (5) from cargo floor (6). Discard locknut (9). INITIAL SETUP: Applicable Models M1025, M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044, M1044A1 Tools General mechanic’s tool kit: automotive (appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 70) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation 1. Install tripod bracket (5) on cargo floor (6) with washer (1), capscrew (2), washer (1), and locknut (9). 2. Secure tripod bracket (5) to cargo floor (6) with washer (4), capscrew (3), large washer (7), washer (4), and locknut (8). Tighten locknuts (8) and (9) to 6 lb-ft (8 N•m). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 11-144 Change 2