TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 393 of 1170
11-100. MACHINE GUN STOP REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove two locknuts (4), washers (2), capscrews (1), washers (2), and stop (3) from wheelhouse (5). Discard locknuts (4). INITIAL SETUP: Applicable Models M1025, M1025A1, M1025A2, M1026, M1026A1, M1043, M1043A1, M1043A2, M1044, M1044A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 70) Personnel Required One mechanic One assistant Manual Refer ences TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation Install stop (3) on wheelhouse (5) with two washers (2), capscrews (1), washers (2), and locknuts (4). Tighten locknuts (4) to 6 lb-ft (8 N•m). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 11-142 Change 2