TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 388 of 1170
11-95. GUN ADAPTER PLATE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two capscrews (2) and washers (1) from adapter plate (5) and cargo floor (11). 2. Remove locknut (14), washer (4), capscrew (3), and washer (4) from adapter plate (5) and cargo floor (11). Discard locknut (14). 3. Remove locknut (12), washer (6), reinforcement bracket (13), capscrew (7), and washer (6) from adapter plate (5) and cargo floor (11). Discard locknut (12). 4. Remove capscrew (8), washer (9), adapter plate (5), and cargo tiedown (10) from cargo floor (11). INITIAL SETUP: Applicable Models M1043, M1043A1, M1043A2, M1044, M1044A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 70) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-24P b. Installation 1. Install cargo tiedown (10) and adapter plate (5) on cargo floor (11) with washer (9) and capscrew (8). 2. Install adapter plate (5) on cargo floor (11) with washer (6), capscrew (7), reinforcement bracket (13), washer (6), and locknut (12). 3. Secure adapter plate (5) to cargo floor (11) with washer (4), capscrew (3), washer (4), and locknut (14). 4. Secure adapter plate (5) to cargo floor (11) with two washers (1) and capscrews (2). 5. Tighten capscrews (2), (7), and (3) to 6 lb-ft (8 N•m). Tighten capscrew (8) to 75 lb-ft (102 N•m). TM 9-2320-280-20-3 Change 2 11-137