TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 373 of 1170
11-81. DAY SIGHT STOWAGE BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove four locknuts (6), washers (5), capscrews (10), and bracket (2) from cargo floor (9). Discard locknuts (6). 2. Remove seven locknuts (3), washers (4), capscrews (8), and two pads (1) from bracket (2). Discard locknuts (3). 3. Inspect four spacers (7) in cargo floor (9) for damage. Replace any spacer (7) if damaged. INITIAL SETUP: Applicable Models M966, M966A1, M1036, M1045, M1045A1, M1045A2, M1046, M1046A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1)) Materials/Parts Detergent (Appendix C, Item 17) Four locknuts (Appendix G, Item 70) Seven locknuts (Appendix G, Item 76) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation 1. Lubricate pads (1) with detergent and install on bracket (2) with seven capscrews (8), washers (4), and locknuts (3). Tighten locknuts (3) to 6 lb-ft (8 N•m). 2. Install bracket (2) on cargo floor (9) with four capscrews (10), washers (5), and locknuts (6). Tighten locknuts (6) to 6 lb-ft (8 N•m). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 11-123