TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 372 of 1170
11-80. FUEL CAN TRAY AND HOSE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove screw (8) and hose clamp (6) from frame (5) and remove hose (7) from fuel can tray (3). Discard screw (8). 2. Remove four screws (1), washers (2), and fuel can tray (3) from cargo floor (4). INITIAL SETUP: Applicable Models M966, M966A1, M1036, M1045, M1045A1, M1045A2, M1046, M1046A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Screw (Appendix G, Item 284) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear of cargo shell door raised (TM 9-2320-280-10). b. Installation 1. Install fuel can tray (3) on cargo floor (4) with four washers (2) and screws (1). Tighten screws (1) to 6 lb-ft (8 N•m). 2. Connect hose (7) to fuel can tray (3). 3. Install hose (7) on frame (5) with clamp (6) and screw (8). Tighten screw (8) to 7 lb-ft (10 N•m). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 11-122 Change 2