TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 370 of 1170
11-78. TRIPOD LEG MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove three locknuts (9), washers (5), capscrews (6), washers (5), tripod leg bracket (4), and spacers (10) from cargo floor (7). Discard locknuts (9). 2. Remove two nuts (11), washers (2), capscrews (1), washers (2), strap bracket (8), and strap (3) from tripod leg bracket (4). INITIAL SETUP: Applicable Models M966, M966A1, M1036, M1045, M1045A1, M1045A2, M1046, M1046A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Three locknuts (Appendix G, Item 70) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Rear end of cargo shell door raised (TM 9-2320-280-10). • Pioneer tool rack removed (TM 9-2320-280-10). b. Installation 1. Install strap bracket (8) and strap (3) on tripod leg bracket (4) with two washers (2), capscrews (1), washers (2), and nuts (11). 2. Install three spacers (10) and tripod leg bracket (4) on cargo floor (7) with three washers (5), capscrews (6), washers (5), and locknuts (9). 3. Tighten front and rear locknuts (9) and center capscrew (6) to 6 lb-ft (8 N•m). FOLLOW-ON TASKS: • Close cargo shell door (TM 9-2320-280-10). • Install pioneer tool rack (TM 9-2320-280-10). TM 9-2320-280-20-3 11-120 Change 2