TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 368 of 1170
11-77. MISSILE GUIDANCE SET (MGS) BATTERY RACK ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two locknuts (11), washers (2), capscrews (3), and washers (2) from MGS battery rack (4) and missile rack (1). Discard locknuts (11). 2. Remove four locknuts (9), washers (5), reinforcement brackets (8) and (10), capscrews (6), washers (5), and MGS battery rack (4) from wheelhouse (7). Discard locknuts (9). 3. Remove footman loop and strap (para. 10-9) from MGS battery rack (4). INITIAL SETUP: Applicable Models M966, M966A1, M1036, M1045, M1045A1, M1045A2, M1046, M1046A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Six locknuts (Appendix G, Item 70) Personnel Required One mechanic One assistant Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Rear end of cargo shell door raised (TM 9-2320-280-10). • Water can bumper removed (para. 11-76). b. Installation 1. Install footman loop and strap (para. 10-9) on MGS battery rack (4). 2. Install MGS battery rack (4) on wheelhouse (7) with four washers (5), capscrews (6), reinforcement brackets (8) and (10), washers (5), and locknuts (9). 3. Install MGS battery rack (4) on missile rack (1) with two washers (2), capscrews (3), washers (2), and locknuts (11). Tighten capscrews (3) and locknuts (9) to 6 lb-ft (8 N•m). TM 9-2320-280-20-3 11-118 Change 2