TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 367 of 1170
11-76. WATER CAN BUMPER REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove two locknuts (2), washers (3), capscrews (6), washers (3), water can bumper (5), and water can bumper bracket (4) from MGS battery rack assembly (1). Discard locknuts (2). INITIAL SETUP: Applicable Models M966, M966A1, M1036, M1045, M1045A1, M1045A2, M1046, M1046A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 70) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Rear end of cargo shell door raised (TM 9-2320-280-10). b. Installation Install water can bumper bracket (4) and water can bumper (5) on MGS battery rack assembly (1) with two washers (3), capscrews (6), washers (3), and locknuts (2). Tighten locknuts (2) to 6 lb-ft (8 N•m). FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10). TM 9-2320-280-20-3 Change 2 11-117