TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 353 of 1170
11-72. TRAVERSING UNIT MOUNT ADAPTER MAINTENANCE This task covers: a. Disassembly b. Assembly a. Disassembly Remove six locknuts (3), washers (4), capscrews (5), three retainers (6), and coupling clamp (1) from traversing unit mount adapter (2). Discard locknuts (3). INITIAL SETUP: Applicable Models M966, M966A1, M1036, M1045, M1045A1, M1045A2, M1046, M1046A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Six locknuts (Appendix G, Item 70) Manual References TM 9-1425-450-12 TM 9-1425-472-12 TM 9-2320-280-24P Equipment Condition Traversing unit mount adapter removed (TM 9-1425-450-12, TM 9-1425-472-12). b. Assembly Install coupling clamp (1) on traversing unit mount adapter (2) with three retainers (6), capscrews (5), washers (4), and locknuts (3). Tighten locknuts (3) to 6 lb-ft (8 N•m). NOTE • Upper coupling clamp and lower coupling clamp are removed and installed the same. This procedure covers the upper coupling clamp. • Note position of coupling clamp for installation. FOLLOW-ON TASK: Install traversing unit mount adapter (TM 9-1425-450-12, TM 9-1425-472-12). TM 9-2320-280-20-3 Change 2 11-103