TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 348 of 1170
TM 9-2320-280-20-3 11-68. CABLE STOWAGE CLEAT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Manual References M966, M966A1, M1036, M1045, M1045A1, TM 9-2320-280-24P M1045A2, M1046, M1046A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) NOTE The cable stowage cleat for vehicles with serial numbers 100,000 and above is located behind the companion seat. Removal and installation procedures are basically the same. 1. Uncoil TOW wiring harness (1) and MGS power cable (2) from cable stowage cleat (6). 2. Remove two capscrews (4), washers (5), and cable stowage cleat (6) from support assembly (3). 1. Install cable stowage cleat (6) on support assembly (3) with twO washers (5) and capscrews (4). Tighten capscrews (4) to 6 lb-ft (8 N.m). 2. Coil TOW wiring harness (1) and MGS power cable (2) around cable stowage cleat (6). 11-98