TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 341 of 1170
11-66. VEHICLE POWER CONDITIONER (VPC) MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal Remove four locknuts (5), washers (4), screws (1), and vehicle power conditioner (VPC) mounting bracket (3) from underside of radio rack (2). Discard locknuts (5). INITIAL SETUP: Applicable Models M966, M966A1, M1036, M1045, M1045A1, M1045A2, M1046, M1046A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four locknuts (Appendix G, Item 96) Manual References TM 9-2320-280-24P b. Installation Install VPC mounting bracket (3) on underside of radio rack (2) with four screws (1), washers (4), and locknuts (5). Tighten locknuts (5) to 6 lb-ft (8 N•m). TM 9-2320-280-20-3 Change 2 11-91